Sabrent EC-UEIS7 manual Figure a

Sabrent EC-UEIS7 USB 2.0/ESATA TO 3.5″ IDE/SATA/SATA II ALUMINUM HARD DRIVE ENCLOSURE WITH COOLING FAN

1.Device Setup

3.5Inch IDE Drive:

1.Check if your IDE drive has Jumpers, if so make sure they are set to Master. (Note: Please refer to the drive manufacturer’s website for more information regarding your specific hard drive model.):

2.Remove the screws, on the side without the fan, using the included screwdriver. Remove the panel:

Figure A: