Saeco Coffee Makers 104342 manual Dispensing hot water, Occasionally, after turning

• Turn the selector switch clockwise to set it to the “”position.

Note: The lights that indica- te the aroma are off when

dispensing hot water.

• Fill the cup with hot water to the desi-

red level; to stop hot water dispensing,

turn selector switch counter-clockwise

back to the “ ” position. The machine

returns to the normal operating

mode.

Blinking	Occasionally, after turning
	the selector switch, hot water
	may not be dispensed and the but-
	tons will start blinking. Simply wait
	until the end of the warm-up phase
	so that hot water can be dispensed
	from the Pannarello.

ned and free of any milk residue.

To prepare your cappuccino, we recommend discharging

the water in the steam wand.

•To discharge the water in the steam wand, place a container under the steam wand (Pannarello, if supplied).

• When the machine is ready to brew
coff ee, turn selector switch counter-
clockwise to set it onto the “	”po-
sition. Residual water may come out
of the steam wand (Pannarello, if
supplied).

STEAM DISPENSING / PREPARING A CAPPUC CINO

Steam may be used to froth milk for a cappuccino, as well as to reheat other beverages.

Blinking

•The“” and “”lights blink during the preheating time required by the machine.

Note: The lights that indica- te the aroma are off when

dispensing steam.

Danger of scalding! Brewing may be preceded by small jets of hot water. The steam wand may reach high temperatures. Never

touch it with bare hands.

Important note: immediately after using the steam to froth the milk, clean the steam wand (or

Pannarello when provided). When the machine is ready, brew a small amount of hot water in a glass and clean the steam wand (or Pannarello when provided) externally. In this way, all parts will be perfectly clea-

• 14 •

Steady on	• Steam dispensing will begin when the
	buttons“	” and “	”are displayed
	steady on; soon after, only steam will
	begin to come out.

• Turn the selector switch clockwise and set it back to the “”position to stop dispensing steam.