Steady on
22 Hold the “
“ button pressed for 6 seconds to reset the machine and cancel the descaling alarm signal.
The light “
”turns off.
Reassemble the external part of the Pan- narello.
The descaling cycle is complete. Then, the products can be brewed.
If the machine is switched off during the descaling cycle, next time the machine is switched
on the cycle must be repeated from the beginning.
The descaling solution must be disposed of according to the manufacturer’s instructions
and/or regulations in force in the country of use.
After completing the desca- ling cycle, wash the brew group as described in the “Brew Group” section in the “Cleaning and
maintenance” section.
Remarks on Descaling
The previous section explains the correct operations to perform to descale the machine.
The machine you have purchased is equip- | English |
| |
ped with advanced software to check the |
|
quantity of used water in order to provide |
|
reliable information about the right time |
|
to carry out descaling operations. |
|
This software has been programmed for |
|
standard water hardness. |
|
In case of especially hard water (high |
|
calcium content), descaling cycles might |
|
have to be carried out more frequently, |
|
even if the machine does not display war- |
|
ning signals. |
|
Even if the machine is not used often (e.g. |
|
1 coffee per day), it is recommended to |
|
perform descaling cycles more frequen- |
|
tly. |
|
In these specific cases, it is recommended to perform descaling cycles every
• 19 •
