TOC
TOC
MAINTENANCE | ||
|
|
|
SAFETY PRECAUTIONS
Return to Section
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master
Return to Master TOC
Return to Master TOC
Return to Master TOC
WARNING
Have qualified personnel do the maintenance work. Turn the engine off before working inside the machine. In some cases, it may be necessary to remove safety guards to perform required maintenance. Remove guards only when necessary and replace them when the mainte- nance requiring their removal is complete. Always use the greatest care when working near moving parts.
Do not put your hands near the engine cooling blower fan. If a problem cannot be corrected by following the instructions, take the machine to the nearest Lincoln Field Service Shop.
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts or electrode with skin or wet clothing.
•Insulate yourself from work and ground
•Always wear dry insulating gloves.
ENGINE EXHAUST can kill.
• Use in open, well ventilated areas or vent exhaust outside.
MOVING PARTS can injure.
•Do not operate with doors open or guards off.
• Stop engine before servicing.
•Keep away from moving parts.
See additional warning information throughout this operator’s manual and the Engine manual as well.
and the engine instruction manual before working on this machine.
Keep all equipment safety guards, covers, and devices in position and in good repair. Keep hands, hair, cloth- ing, and tools away from gears, fans, and all other mov- ing parts when starting, operating, or repairing the equipment.
•ROUTINEAt the MAINTENANCEend of each dayʼs use, refill the fuel tank to minimize moisture condensation in the tank. Running out of fuel tends to draw dirt into the fuel system. Also, check the crankcase oil level and add oil if indicated.
CAUTION
Make certain that the oil filler cap is securely tight- ened after checking or adding oil. If the cap is not tight, oil consumption can increase significantly which may be evidenced by white smoke coming
from the exhaust.
• OIL - Maintenance schedule for changing the oil and oil filter after
|
| KOHLER | HONDA |
| ROBIN / SUBARU |
Oil |
| 100 HRS. | 6 Months |
| 100 HRS. |
| 100 HRS. |
| |||
Oil Filter | 200 HRS. | 1 Year or |
| 200 HRS. | |
200 HRS. |
| ||||
The above | schedule is | for normal | operating conditions. | ||
More frequent oil changes are required with dusty, high | |||||
temperature and other severe operating conditions. | |||||
Refer to the maintenance section of the Engine | |||||
Owner's Manual for more information. |
| ||||
NOTE: | Engine life will be reduced if the oil and oil fil- | ||||
| ter are not changed according to the manufac- | ||||
| turerʼs recommendation. |
| |||
DrainENGINEthe oilOILwhileCHANGEthe engine is warm to assure rapid and complete draining.
• Remove the oil filler cap and dipstick. Remove the yellow cap from the oil drain valve and attach the flex- ible drain tube supplied with the machine. Push in and twist the drain valve counterclockwise. Pull the valve out and drain the oil into a suitable container.
• Close the drain valve by pushing in and twisting clockwise. Replace the yellow cap.
• Refill to the upper limit mark on the dipstick with the recommended oil. Tighten the oil filler cap securely.
WithoutENGINEoil OILfilter replacement:REFILL CAPACITIES
• 1.7 US qt. (1.4 Imp qt., 1.6
•1.6 US qt. (1.3 IMP qt., 1.5
With oil filter replacement:
• 2.0 US qt. (1.7 Imp qt., 1.9
•1.9 US qt. (1.6 Imp qt. , 1.8
