Lincoln Electric SVM168-B service manual PRE-OPERATION Service, Gasoline, Vehicle Mounting

Models: SVM168-B

1 112
Download 112 pages 575 b
Page 11
Image 11

A-5

INSTALLATION

A-5

 

 

 

Return to Master TOC

3. Proper placement of the equipment on the trailer to insure stability side to side and front to back when being moved and when standing by itself while being operated or serviced.

4. Typical conditions of use, i.e., travel speed; rough- ness of surface on which the trailer will be operated; environmental conditions.

5. Conformance with federal, state and local laws(1)

(1) Consult applicable federal, state and local laws regarding specif- ic requirements for use on public highways.

VEHICLE MOUNTING

FUEL

Fill the fuel tank with clean, fresh, lead-free gasoline. Observe fuel gauge while filling to prevent overfilling.

WARNING

• Damage to the fuel tank may cause fire or explosion. Do not drill holes in or weld to the RANGER® 10,000 or the RANGER® 10,000 PLUS base.

-----------------------------------------------------------------------

Return to Section TOC

Return to Section TOC

Return to Master TOC

WARNING

Improperly mounted concentrated loads may cause unstable vehicle handling and tires or other components to fail.

• Only transport this Equipment on serviceable vehicles which are rated and designed for such loads.

• Distribute, balance and secure loads so vehicle is stable under conditions of use.

• Do not exceed maximum rated loads for compo- nents such as suspension, axles and tires.

• Mount equipment base to metal bed or frame of

vehicle.

------------------------------------------------------------------------ Follow vehicle manufacture’s instructions.

OIL

LUBRICATION SYSTEM CAPACITY

(INCLUDING FILTER)

Kohler CH20S / CH23S - 2.0 Quarts (1.9 Liters)

Honda GX620KI - 1.9 Quarts (1.8 Liters)

Robin Subaru EH64 /EH65 - 1.6 Quarts (1.6 Liters) The RANGER® 10,000 and the RANGER® 10,000 PLUS are shipped with the engine crankcase filled with SAE 10W-30 oil. Check the oil level before start- ing the engine. If it is not up to the full mark on the dip stick, add oil as required. Make certain that the oil filler cap is tightened securely. Refer to the engine Ownerʼs Manual for specific oil recommendations.

Return to Section TOC

Return to Master TOC

PRE-OPERATION SERVICE

CAUTION

READ the engine operating and maintenance instructions supplied with this machine.

WARNING

CAUTION

BATTERY CONNECTIONS

Use caution as the electrolyte is a strong acid that can burn skin and damage eyes.

-----------------------------------------------------------------------

This welder is shipped with the negative battery cable

Section TOC

Master TOC

GASOLINE

can cause fire or explosion.

Stop engine while fueling.

Do not smoke when fueling.

Keep sparks and flame away from tank.

Do not leave unattended while fueling.

Wipe up spilled fuel and allow fumes to clear before starting engine.

Do not overfill tank, fuel expan- sion may cause overflow.

disconnected. Make sure that the Engine Switch is in the “STOP” position and attach the disconnected cable securely to the negative battery terminal before attempting to operate the machine. If the battery is dis- charged and does not have enough power to start the engine, see the battery charging instructions in the Battery section.

: This machine is furnished with a wet charged battery;NOTE if unused for several months, the battery may requiretery witha theboostercorrectcharge.polarity.Be careful to charge the bat-

Return to

Return to

GASOLINE FUEL ONLY

------------------------------------------------------------------------

RANGER® 10,000 & RANGER® 10,000 PLUS

Page 11
Image 11
Lincoln Electric SVM168-B service manual PRE-OPERATION Service, Gasoline, Vehicle Mounting, Can cause fire or explosion