OPTIONAL EQUIPMENT (Field Installed)
K957-1 HEAVY DUTY,ForTWOroad,WHEELoff-roadTRAILERandin-plantFOR andSMALLyardWELDERStowing. (For- highway use, consult applicable federal, state and local laws regarding requirements for brakes, lights, fenders, etc.)
Order K957-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Storage Rack
- For moving byK889hand-2 &. Overall-3Two-Widthheel29Undercarriagein (.74m) Both have pneu- matic tires. Puncture proof tires included with K889-3.
For converting
K8891631-2-1orPunctureK933-1 toProofpunctureWheelproofKitpneumatic- tires.
- Mounts to the frontK893-of1theCasterK889for-2 orUnderc3 to allowrriageeasy movement on smooth surfaces. Includes 6” diameter hard rubber wheel and convenient toe-on, toe-off locking brake.
- For Hand
MovingK933-1. RearFourpneumaticWheel Undercarriagetires, front molded wheels.
- For use with K933-1. For
transportingK934-1 CylindonerweldingBracketsgas cylinder.
K1737-1 FOURFor movingWHEELbyALLhand-TERRAINat constructionUNDERCARsites.- HeavyRIAGEduty- puncture resistant pneumatic tires.
- For mov- ingK1770by hand-1 UNDERCARRIAGEon a smooth surface(FACTORY). One or two gas cylin- ders can be mounted on the rear of the undercarriage with the installation of K1745-1 Cylinder Holder(s). Heavy duty puncture resistant pneumatic tires and front caster.
HoldsK1745-Welding1 GAS CYLINDERGas CylinderHOLDERfor use on K1770-1 Undercarriage. One or two may be installed on an undercarriage.
- Gives added damage protec-
tion.K1788Attaches-1ROLLtoCAGEK1737-1, K1770-1, and K957-1.
-To protect the RANGER® 10,000K886-1whenCa vasnot inCovuse.r Made from attractive red can- vas material which is flame retardant, mildew resistant, and water repellent.
Power Plug Kit- provides four 120V plugs ratedK802-atR15 amps each and one dual voltage, Full KVA plug rated at 120/240V, 50 amps.
- Provides four 120V plugs ratedK802-atN20PowerampsPlugeachKitand one dual voltage, full KVA plug rated at 120/240V, 50 amps.
- Includes a heavy gauge
steel,K894-1approvedSpark Arresterspark arresterKit and clamp for easy mounting to muffler exhaust pipe.
- Includes one UL approved120VK1690- GFCIgroundRECEPTACLEfault circuitKITinterrupter duplex type receptacle with cover and installation instructions. Replaces the factory installed 120V duplex receptacle. Each receptacle of the GFCI Duplex is rated at 20 Amps, the maximum total current from the GFCI Duplex is limit- ed to the 20 Amps. Two kits are required. Plugs into the 120/240VK1816- FULLNEMAKVA14-50RADAPTERreceptacleKITon-the case front (which accepts 4-prong plugs) and converts it to a NEMA 6-50R receptacle, (which accepts 3-prong plugs.)
Full-KVA Power Plug - One dual voltage plug
ratedT12153at-120/240V,950 amps.
- Provides high frequency and shieldingK930-2 TIGgas Modulecontrol.for AC and DC GTAW (TIG) weld- ing applications. Its compact case is designed foe easy carrying, complete with a handle. High frequency bypass is built in
Requires K938-1 Contactor Kit, K936-4 Control Cable, and K814 Arc Start Switch.
Contactor Kit - For use with TIG Module, ProvidesK938-1a “cold” electrode until the triggering device (Arc Start Switch) is pressed.
Control Cable - Connects TIG Module to RANGER®K936-410,000.
Arc Start Switch - Attaches to the TIG torch for
convenientK814 finger control.
Control Cable Extension - Allows TIG Module
toK937be -operated45at distances up to 200ft. from the power source. Available in 45ft. (13.7m).
Water Valve Kit - For use with water cooled TIGK844torch,-1Installs inside of TIG Module.
Docking Kit - For Mounting the K930-2 TIG ModuleK939-1on top of the RANGER® 10,000.
