Saeco Coffee Makers CAP001B 5.2Coffee with a dash of milk dispensing, 5.3Cappuccino dispensing

English

5.2Coffee with a dash of milk dispensing

This drink consists of freshly ground and freshly brewed coffee dispensed by the coffee dispensing unit, to which a dash of warm milk is added by the cappuccino dispensing unit.

-Insert the milk supply tube (fig. 1, 6) into the milk container.

-Press the key.

“COFFEE WITH A DASH OF MILK” will appear on the di- splay.

During the dispensing process “PREBREWING” will appear on the display, if activated by the menu (see the Instruction and Mainte- nance manual of the MODULAR machine), while to the side of this an icon will appear showing a container being filled.

When dispensing finishes “READY FOR USE” will appear on the display.

5.3Cappuccino dispensing

This drink consists of frothed milk dispensed by the CAPPUCCINA- TORE dispensing unit to which freshly ground and freshly brewed coffee is added by the coffee dispensing unit.

-Insert the milk supply tube (fig. 1, 6) into the milk container.

-Press the key.

“CAPPUCCINO” will appear on the display;

-Regulate the quality of froth to be dispensed (see 5.1 Froth regulation) using the pin (fig. 1, 2).

During the dispensing process “PREBREWING” will appear on the display, if activated by the menu (see the Instruction and Mainte- nance manual of the MODULAR machine), while to the side of this an icon will appear showing a container being filled.

When dispensing finishes “READY FOR USE” will appear on the display.

5.4 Hot milk dispensing

This drink consists only of hot milk dispensed by the CAPPUCCI- NATORE dispensing unit.

-Insert the milk supply tube (fig. 1, 6) into the milk container.

-Press the key.

“HOT MILK” will appear on the display;

-Regulate the quality of froth to be dispensed (see 5.1 Froth regulation) using the pin (fig. 1, 2).

During the dispensing process an icon will appear showing a

12

container being filled.

When dispensing finishes “READY FOR USE” will appear on the display.

5.5 Programming dispenser keys

All the dispensing keys , and have a self-instructing memory. Once programmed they will dispense the same quantity of the drink each time they are activated.

To programme (or re-programme) the and keys, set the dosage of coffee and milk in the drink independently, using the following two procedures.

To programme (or re-programme) the or keys:

-Switch on the machine;

-prepare the machine for use;

-place a container under the dispensing spout (fig. 1, 4);

-press and continue to press (for more than 4 seconds) the

or key.

PROGRAMMING COFFEE WITH A DASH OF MILK or PROGRAM- MING CAPPUCCINO will appear on the display.

The machine will carry out a grinding cycle and dispense the coffee.

-Release the or key when the desired quantity of coffee has been dispensed. This quantity is now automatically memorised.

To programme the milk portion:

-press and continue to press (for more than 4 seconds) the key. PROGRAMMING MILK will appear on the display.

-Release the key.

-press and continue to press (for more than 4 seconds) the

or key.

The CAPPUCCINATORE will discharge the condensation in the spouts, take the milk and dispense it into the container.

-Release the o key.

The CAPPUCCINATORE will discharge steam from the spout.

Activate the keys briefly (less than 1 second) to obtain the pro- grammed drink.

To programme (or re-programme) the key:

-press and continue to press (for more than 4 seconds) the key. PROGRAMMING MILK will appear on the display.

-	Release the	key.
-	press and continue to press the		key.