12ENGLISH
C |
|
Intenza Aroma System AB | 2 3 4 Machine Water Hardness Setting |
| 1 |
Yellow
Measuring and Programming Water Hardness
Water hardness measuring is very important in order to define the descal- ing frequency and to install the “INTENZA+” water filter (for more detail on the water filter, see next chapter).
To measure the water hardness follow the steps below:
1Immerse the water hardness test strip (supplied with the machine) in water for 1 second.
Note:
The test strip can only be used for one single measurement.
2Wait for one minute.
3Check how many squares have changed to the color red and then refer to the table.
Note:
The numbers on the water hardness test strip correspond to the water hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the “INTENZA+” water filter (see next chapter).
4Press the “” button and scroll the pages by pressing the “” button until the following icon is displayed.
Note:
The machine is supplied with a standard water hardness setting, suitable for most types of water.