10INSTALLATION - MONTAGE
7
Place a container beneath the steam spout.Placer un récipient sous la buse de vapeur.
8
Turn the knob until the position is reached. Tourner le bouton jusqu’au pointde repère .
9
Wait until a steady fl ow of water comes out of the wand.
Attendre jusqu’à ce que l’eau coule de manière régulière.10 | 11 |
Turn the knob until it is in the | Remove the container. | ||
rest position ( ). |
|
| |
Retirer le récipient. | |||
| |||
|
12
The machine is ready for use.
La machine est prête.
RINSING OF THE INTERNAL CIRCUITS
RINÇAGE DES CIRCUITS INTERNES
When the correct temperature is reached, the machine performs a rinse cycle of the internal circuits. A small amount of water is dispensed; during this phase, the lights fl ash counterclockwise. Wait for this cycle to be completed.
Lorsque la température de fonctionnement est atteinte, la machine effectue un cycle de rinçage des circuits internes. Une petite quantité d’eau est distribuée ; pendant cette phase les DELS (diodes lumineuses) clignotent régulièrement dans le sens contraire aux aiguilles d’une montre. Attendre que ce cycle se termine