6

INSTALLATION / PRIMING The messages displayed by the machine during operation are shown on page 14.

 

 

 

 

 

See rating plate

 

 

 

 

 

 

 

 

 

Fill the coffee bean container

Fill

the

tank with

fresh

Insert the plug

into

a

sui-

Move

the

ON/OFF switch

The machine is warming

with coffee beans.

water.

 

 

table outlet.

 

 

 

to

“I”

to

turn

on

the

up; lights are flashing.

 

 

 

 

 

 

 

 

 

machine.

 

 

 

 

Place a container

under

Press

the

hot

water

Turn the knob countercloc-

Wait until a steady stream

Turn the knob clockwise to

the steam wand.

 

button.

 

 

 

kwise to start

priming the

of water flows out from the

stop the priming process.

 

 

 

 

 

 

machine.

 

nozzle.

 

 

 

 

 

 

 

 

 

 

Note: Prime the machine during initial set up, if the

 

 

 

 

 

 

 

 

machine has not been used for several days, after

 

 

 

 

 

 

 

 

refilling the water tank, or any time the priming in-

 

 

 

 

 

 

 

 

dicator light flashes.

 

 

Remove the container.

Press

the

water

button

The machine

is ready for

 

 

 

 

 

 

 

 

 

 

again.

 

 

 

use.

 

 

 

 

 

Page 6
Image 6
Saeco Coffee Makers SUP021YR, SUP021R manual Dicator light flashes