Saeco Coffee Makers SUP021YR, SUP021R manual Programming Machine Functions, Rinsing

12PROGRAMMING MACHINE FUNCTIONS

The following programming features can be changed to suit your needs.

PROGRAMMING START Procedure for accessing the programming mode.

Turn the machine off.

WATER HARDNESS	The hardness of tap, bottled and filtered water may vary
	(1 = soft and 4 = hard).
	depending on the region, brand and filter used. For this
	reason, the appliance can be set according to the water
	hardness to be used, expressed on a scale of 1 to 4
	The appliance is factory set on a hardness value of 3*. The	Dip the strip in water for 1
	setting should be adjusted according to the level of water	second.
	hardness to be used with the machine.	Check how many squares
		change color.
RINSING	When this function is enabled, the internal machine circuits
	will be rinsed immediately after the warming-up phase to
	ensure that coffee is prepared with fresh water only.
	In all new appliances this function has already been	Press the button to set the
	activated at the factory.	function.

and

Press the small coffee button and the hot water button, and simultaneously, turn the machine on.

	Hardness 4
	Hardness 3*
	Hardness 2
	Hardness 1
Press the button.	The degree of hardness
	will be signaled by the
	indicator lights.

Rinsing activated (ON). Rinsing deactivated (OFF).