Saeco Coffee Makers Titan instruction manual Troubleshooting, Problem Possible Cause Solution

Troubleshooting

PROBLEM	POSSIBLE CAUSE	SOLUTION
The unit does not grind.	Cup control dial has not been set.	Set cup control dial to desired number.
	Unit is unplugged.	Plug unit in.
	No power to outlet.	Check power outlet / Try another power outlet.
	Motor has overheated.	Contact Saeco Customer Service.
Not enough ground coffee	Cup control dial set incorrectly.	Set cup control dial to higher number.
dispensed by end of cycle.	Insufficient amount of whole beans in bean hopper.	Add coffee beans to bean hopper.
	Ground coffee chute is clogged.	Unplug grinder and clean coffee chute.
	Grind set too fine.	Set grind to coarser grind.
Size of ground coffee granules	Ground coffee chute is clogged.	Unplug grinder and clean coffee chute.
is not consistent.	Grind setting is not correct.	Adjust grind control ring to correct grind setting.
The unit stops grinding.	Cup control dial set incorrectly.	Set cup control dial to higher number.
	Cup control dial inadvertently rotated to off	Turn clockwise to desired cup setting.
	(straight up).
	The unit has been unplugged.	Plug unit in.
	No power to outlet.	Check power / outlet.
	Ground coffee chute is clogged.	Unplug grinder and clean coffee chute.
	Motor has overheated.	Contact Saeco Customer Service.
	Control dial is at off setting (straight up).	Turn clockwise to desired cup setting.
Cup control dial will not turn.	Control dial is at 10.	At maximum setting - cannot turn clockwise any further.
	Control dial is broken.	Contact Saeco Customer Service.
	Set at finest. Cannot turn clockwise any further.	Turn counter-clockwise for desired coarser setting.
Grind control ring does not turn.	Set at coarsest. Cannot turn counter-clockwise any	Turn clockwise for desired finer setting.
	further.
	Grinder clogged.	Contact Saeco Customer Service.

10