18DISPLAY MESSAGES - NOTES ON THE AQUA PRIMA CARTRIDGE FILTER
FACTORY SETTINGS
With this function you can restore the machine operating parameters to the original settings set by the manufacturer. If you restore all the factory settings, all customized settings will be lost and you will need to reprogram them if so desired.
FACTOR.SETTINGS* ENERGY SAVING
FACTOR.SETTINGS NO
FACTOR.SETTINGS YES
When the function appears, | Choose whether to restore | Press the “M” button to |
select it using the “M” button. | the initial factory settings. | confirm your choice: |
Messages are displayed to guide users through the usage of the machine correctly. |
|
|
ENERGY SAVING
DESCALING READY FOR USE
FILL WATERTANK
COF BEANS EMPTY READY FOR USE
Press “M” .
Descale the machine.
Fill the water tank with fresh water.
Fill the coffee bean container and press the desired coffee button to start the brewing cycle.
CLOSE DOOR
BREWUNIT BLOCKED
GRINDER BLOCKED
Close the front door.
Contact an authorized service center.
DREGDRAWER FULL
Remove the dregs drawer / waste box and empty out the used coffee grounds.
ADDITIONAL INFORMATION FOR CORRECTLY USING THE “AQUA PRIMA”
FILTER.
Please follow these simple instructions to correctly use the “Aqua prima” filter:
Important note: the dregs drawer / waste box may be emptied only when the machine is ON. The drawer must be removed for at least 5 seconds for the machine to read that the drawer has been emptied. If you empty the drawer with the machine off, you will not be able to dispense coffee the next time you switch the machine on.
1.Keep the “Aqua prima” filter cool and away from sunlight; the room temperature should be between 41°F/+5°C and 104°F/+40°C;
2.Do not use the filter in temperatures over 140°F/60°C.
3.If the coffee machine is not used for 3 days, we recommend washing the “Aqua prima” filter;
BREW UNIT MISS.
INSERT DREGDRAW.
TRAY MISSING
Put the brew group properly in place.
Put the dregs drawer / waste box properly in place.
Put the drip tray properly in place.
4If the coffee machine is not used for more than 20 days, it is advisable to replace the filter.
5.To store an already opened filter, seal it in a nylon bag and keep in the fridge; do not store it in the freezer to avoid damaging the filter properties.
6.Before using the filter, leave it to soak in the water tank for 30 minutes.
7.Once it is taken out of its packaging, do not keep the filter in the open air.
8.The filter must be replaced 90 days after opening the package or after treating 13 gal- lons/60 litres of water.
