Saeco Coffee Makers V-spresso Descaling, Timer, Rinsing Cycle, Programming Machine Functions

PROGRAMMING MACHINE FUNCTIONS 17

DESCALING	This function enables you to activate an automatic
	descaling cycle. See page 10 for step by step descaling
	instructions.

DESCALING *

SIGNAL.DESCAL.

When the function ap- pears, select it using the “M” button.

DESCALING DESCALING

Prepare the machine for	Carry out an	automatic
descaling.	descaling cycle	(see page
	10) or press "ESC" to exit if
	descaling is not yet needed.

ENGLISH

TIMER	This is a factory-set function that automatically switches
	have elapsed since the last cup of coffee was dispensed.
	the machine into “Standby” after a maximum of 3 hours
	The switch-off time can be adjusted, in 15-minute intervals,
	to a minimum of 15 minutes; the function cannot be
	deactivated.
RINSING CYCLE	This function is used to rinse all the coffee-dispensing parts
	with water.
	The rinsing cycle cannot be interrupted.
	A person must be present during this operation.

Warning: a large quantity of water may be dispensed from the coffee dispenser. Before starting, empty out the drip tray and keep an additional

container handy.

TIMER	*	STANDBY		STANDBY
RINSING CYCLE		AFTER	3:00	AFTER	1:15

When the function ap-	Use the buttons	to adjust	Press the “M” button to
pears, select it using the	the timer setting.		confirm your choice.
“M” button.

RINSING CYCLE *	RINSING CYCLE	FILL WATERTANK
FACTOR.SETTINGS

When the function ap-	The machine will carry out	When the cycle is finished
pears, select it using the	a rinsing cycle.	the FILL WATER TANK
“M” button.		message will be displayed.