JVC RX-ES1SL Turning off the power with the Sleep, Timer, Basic operations, English, Analog, Lpcm

			Basic operations	English
The following are the analog/digital signal format indicators on the		Turning off the power with the Sleep
display to indicate what type of signal comes into the receiver.		Timer
ANALOG:
	Lights when analog input is selected.	You can fall asleep while listening to music—Sleep Timer.
LPCM:	Lights when Linear PCM signal comes in.	From the remote control ONLY:
DOLBY D:	• Lights when Dolby Digital signal comes in.
		Press SLEEP repeatedly.
	• Flashes when “DGTL D.D.” is selected for software
	not encoded with Dolby Digital.	The SLEEP indicator lights up on the display, and the shut-off time
DTS:	• Lights when DTS signal comes in.
		changes in 10 minutes intervals.
	• Flashes when “DGTL DTS” is selected for software
	not encoded with DTS.		SLEEP indicator

NOTE	ANALOG L	R	SLEEP
	SUBWFR

When “DGTL AUTO” cannot recognize the incoming signal, no	VOL
digital signal format indicator lights up on the display.

10 20 30 40 50 60

0 (Canceled) 90 80 70

Turning off the sounds temporarily— Muting

From the remote control ONLY:

Press MUTING to turn off the sound through all connected speakers.

“MUTING” appears on the display and the volume turns off (the volume level indicator goes off).

ANALOG L R

SUBWFR

To restore the sound, press MUTING again.

•Pressing VOLUME +/– (or turning MASTER VOLUME control on the front panel) also restores the sound.

When the shut-off time comes:

The receiver turns off automatically.

To check or change the remaining time until the shut-off time:

Press SLEEP once.

The remaining time (in minutes) until the shut-off time appears.

• To change the shut-off time, press SLEEP repeatedly.

To cancel the Sleep Timer:

Press SLEEP repeatedly until “SLEEP 0” appears on the display. (The SLEEP indicator goes off.)

• Turning off the power also cancels the Sleep Timer.

13