Getting started
English
Connecting the FM and AM antennas
If FM reception is poor, connect outdoor FM antenna (not supplied).
FM antenna (supplied)
AM antenna connection
Connect the AM loop antenna supplied to the AM LOOP terminals. Connect the white cord to the AM EXT terminal, and the black cord to
Hterminal.
Turn the loop until you have the best reception.
•If the reception is poor, connect an outdoor single
If AM reception is poor, connect an outdoor single vinyl- covered wire (not supplied).
AM loop antenna (supplied)
Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
NOTES
•If the AM loop antenna wire is covered with vinyl, remove the vinyl while twisting it as shown on the
right.
•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. This could cause poor reception.
FM antenna connection
Connect the FM antenna supplied to the FM 75 Ω COAXIAL terminal as temporary measure.
Extend the supplied FM antenna horizontally.
•If the reception is poor, connect an outdoor FM antenna (not supplied). Before attaching a 75 Ω coaxial cable with a connector,
disconnect the supplied FM antenna.
CONTINUED ON THE NEXT PAGE
5