Troubleshooting
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
Surround mode cannot be selected. | Surround mode is not available on the | Play not | |
|
| software being played back, or only the | check the speaker setting. |
|
| front speakers are set for use. |
|
|
|
| |
DSP mode cannot be selected. | DSP mode is not available on the | Play back Linear PCM or analog software or | |
|
| software being played back, or only the | check the speaker setting. |
|
| front speakers are set for use. |
|
Continuous hiss or buzzing during FM | Incoming signal is too weak. | Connect an outdoor FM antenna or contact your | |
reception. |
| dealer. | |
|
|
|
|
|
| The station is too far away. | Select a new station. |
|
|
|
|
|
| An incorrect antenna is used. | Check with your dealer to be sure you have the |
|
|
| correct antenna. |
|
|
|
|
|
| Antennas are not connected properly. | Check connections. |
|
|
|
|
Occasional cracking noise during FM | Ignition noise from automobiles. | Move the antenna farther from automobile traffic. | |
reception. |
|
| |
|
|
| |
NOTE |
|
|
|
|
|
|
|
Surround/DSP
FM/AM
When you use the digital coaxial connection, the sounds may be intermittently distorted by the outside noise such as a lightning discharge but they will restore automatically. This is not a malfunction.
39
