Delay Start

In this mode, you can schedule the cleaner to start a once-off cleaning run from a particular time.

■ A scheduled cleaning run is only performed when the cleaner is docked to the charger station.

 

 

Remote Control

 

Configuration Sequence

 

Blinks

 

 

1.

Press the Delay Start button.

 

 

Decrease

Increase

-

The current setting is

 

 

 

 

 

displayed and

blinks.

Blinks

 

 

 

 

Press the ￿ or ￿ button to

 

 

 

 

set the hour.

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

Press the Delay Start button.

 

 

Decrease

Increase

 

Press the ￿ or ￿ button to

 

 

 

 

 

set the cleaning mode.

Blinks

Blinks

 

 

-

You can select either Auto or

 

 

 

Max cleaning mode.

 

 

 

 

 

 

 

 

 

3.

Press the Delay Start button.

 

Blinks

 

 

-

The value you set will

 

 

 

 

 

blink and the settings are

 

 

 

 

 

completed.

 

 

Blinks

 

 

 

-

When the settings are

 

 

 

 

completed, the confi gured

 

 

 

 

 

 

 

 

 

 

time and

are displayed.

 

 

- If you press the Start/Stop button while the cleaner is charging

Canceling the Settings

or you are setting the time, the settings are canceled.

- Please take note that the settings are canceled if the cleaner

 

 

 

 

is detached from the charger station.

 

 

 

Timeout

- If there is no input for 1 minute while you are setting the time,

 

the cleaner exits Time Set mode automatically.

 

 

 

 

32_ operating