operating the cleaner

INSTALLING THE VACUUM CLEANING ROBOT

Installation order1.Turning the Power Switch on or offTo use the vacuum cleaning robot, you must turn on the Power Switchat the bottom of the main unit.2. Installing the Charger

To charge the vacuum cleaning robot, you must fi rst install the charger. Since the battery is discharged when the product is purchased, you must fully charge the battery before use.

3. Charging the Battery

You should charge the battery completely before using the vacuum cleaning robot.

4.Installing the VIRTUAL GUARD

You can confi ne the vacuum cleaning robot to a particular section by using Fence (virtual wall) mode.

Turning the Power Switch on or offTo use the vacuum cleaning robot, you must turn the Power Switch on.

If you turn off the Power switch, all settings except for the current time and the Weekly reservations are reset.

❈ If no key is pressed for approximately 1 minute after turning the power on, the power is automatically cut to prevent the battery discharging.

To turn the power on again, press and hold the power (Start/ Stop) button on the main body.

1.Lift the body and turn on the power switch while making sure not to press any other button.

- If the icons are not turned on, it indicates that the battery charge is depleted. In this case, dock the vacuum cleaning robot to the charger station after turning the Power Switch on.

-The confi gured time may be different from the current time. If theconfi gure time is incorrect, set the time to the current time.If the Power Switch is turned off, the vacuum cleaning robot willCAUTION not be charged even if it is docked with the charger station.
20_ operating