Samsung NaviBot S VCR8930L3R SR8930 VCR8930L3R/XEE, VCR8930L3R/XET ■Installing the Remote Control Batterise, ■Remote Control, Max, Auto, Spot, Power, Turbo, Sound, Manual, Buttons, Recharging, Start/Stop, Directional

■Remote Control

Power	Recharging
Auto	Max
Directional	Spot
Buttons
(moving backwards is	Start/Stop
not supported.)
Manual	Turbo
Delay Start
	Sound

■Installing the Remote Control Batterise

Batteries are not installed in the remote control when purchasing the product. Install the batteries (type AAA) before use.

1

Lift the battery compartment cover at the back of the remote control, while pressing the locking tab.

2

Install the batteries into the remote control as shown by the fi gure below. (If the batteries are installed with the wrong polarity, the remote control will not work.)

3

After inserting the tip of the cover into the slot, push the other end to close it until it clicks into place.

❈Specifi cation: AAA type batteries

18_ assembling