Manual Cleaning

You can move the vacuum cleaning robot to clean a particular location directly by using the remote control.

■Move the vacuum cleaning robot to the location where you want to perform manual cleaning.

■You can manually clean using the remote control only.

Remote control button

Configuration Sequence

1. Set the mode.

2. Cancel the mode.

• When the vacuum cleaning robot is docked with the

OPERATING 03

NOTE

charger station, manual cleaning is not supported.

•If there is no input for about 1 minute to switch to standby mode.

•

Each time you press the Turbo button, the Turbo icon on

CAUTION

the display panel is turned on or off sequentially. When the

 

Turbo icon is turned on, you can start cleaning in Turbo

 

mode.

Directional Buttons (Forwards, Left, Right)

A backwards function is not supported.

operating _31