Installation Tip:
Loosely attach the tether hook before attaching the LATCH belt. Consult vehicle’s owner manual for specific location.
3. Hook LATCH to Vehicle Anchor
Fasten one LATCH belt hook to the anchor in the vehicle seat bight. Repeat for other side of child restraint.
4. Tighten LATCH Belt
Place knee in the child restraint. Push down firmly while pulling up on the loop to tighten belt.
It maybe easier to tighten the belt through the belt path opening as shown.
49
5.Tighten Top Anchorage
Strap (Tether)
Push firmly on the back of the child restraint and tighten top anchorage strap (tether).
| F. | |
6. Check LATCH Belt | Installing | |
Tightness |
| |
Grasp the child |
| |
restraint at the belt | Forward | |
and back. The child | ||
path with one hand. Push |
| |
and pull the child restraint |
| |
from side to side, forward |
| |
restraint should not move | - | |
Facing | ||
more than 1 inch. | ||
| ||
NOTE: If it moves more |
| |
than an 1 inch, try |
| |
reinstalling the child restraint or try another seating location. |
|
Secure your child in the child restraint.
7.To Remove LATCH Belt From Vehicle Anchor
| Remove child from child | |
| restraint. Press down firmly | |
| on adjuster side of child | |
| restraint and press release | |
| button to release tension. | |
| Unhook LATCH from bar by | |
| squeezing spring lever and | |
1 | twist hook (1). Pull LATCH | |
hook away (2). | ||
|
2
50
