![](/images/new-backgrounds/1138958/13895817x1.webp)
7.Check Harness Height
With child in the child restraint, check the location of the harness slot.
8.Choose the Correct Harness Slot That Fits Your Child
Follow the guidelines below to determine the correct harness height.
NOTE: The upper most harness slot may be behind the headrest pad.
Rear-Facing Position
Harness slot must be even with or just below the shoulders.
If the lowest harness slot is above the child’s shoulders, do not use this child restraint.
Forward-Facing Position
Harness slot must be even with or just above the shoulders.
If the highest harness slot is below the child’s shoulders, do not use this child restraint.
15
9.To Change Harness
Location
From the back of the seat, remove harness from splitter plate.
10. Pull Harness Out of Shell
From the Front
11. Rethread Harness | C. |
Into Correct Harness | Basic |
| |
Location |
|
Make sure harness does | Use |
not twist. |
12. Pull Harness Through
Pad and Shell
Make sure metal headrest bar is above the harness straps.
16 continued on next page.