INSTALLATION FOR USERS OF WINDOWS® 2000
A) Drivers Only For Typical Users
1 With your computer switched on, close down any programs that are currently running and
insert the Saitek Smart Technology CD into your CD-ROM drive.
2 When the Introduction Screen appears, click Install Softwareto continue.
3 When the Welcomescreen appears, click Next to continue. (If the CD does not run
automatically, select Startfrom the Windows® Taskbar, then Run and type D:\Setup.exe and
click OK - where D:\is letter of your CD-ROM drive).
4 After reading the Disclaimer, select the I accept the terms of the Disclaimeroption and click
Next to continue.
5 At the Device Driver Installationscreen, click on Next and follow the on-screen instructions.
6 When prompted, plug your controller’s USB connector into your computer, then click on
Configure.
7 When the Controller Propertiesscreen appears, click Next to view the Test screen.
8 Now try out all your controller’s buttons and controls to show that it is working properly. When
you have finished, click OK.
9 At the Programming Software screen, select Typical Userand click Next.
10 At the Registration screen, select Registerand follow the on-screen instructions or select
Register Laterand click Next.
11 Click on Finishto complete the installation.
B) Drivers and Programming Software For Advanced Users
1 Follow points 1 – 7 of the install procedure in A), then at the Programming Softwarescreen,
select Advanced Userand click Next.
2 At the Programmable Controller Driversscreen, click Update and follow the on-screen
instructions.
3 Then at the Installation of programming software successfulscreen, click Next.
4 At the Registration screen, select Registerand follow the on-screen instructions or select
Register Laterand click Next.
5 Upon completion of the installation, you have the option to Run Profile Editor, which will give
you a view of the 3D programming environment. If you do not wish to see the Profile Editor at
this point, just uncheck the box and click on Finishto complete the installation.