Preparing Your Camera for Use
Battery Installation
Your camera requires two AAA alkaline batteries, which must be inserted as follows:
1.Open the battery compartment on the bottom of the camera.
2.Insert the batteries in accordance with the polarity
3.Close the battery compartment.
The LCD will flash if your batteries are running low in which case you will need to replace the camera’s batteries before taking photos. When the battery voltage drops below 2.2V, the LCD will display “Lo” and then automatically switch off.
Note: If you do not intend to use your camera for an extended period, remove the batteries to avoid leakage and corrosion.
Warning:
•Please download any photos you have on the camera before opening the battery compartment.
•Opening the battery compartment and/or removing the battery will erase the photos currently stored in the camera.
•Download your photos as often as possible. Photos may be lost when the batteries run low.
-5 -
