3.Unbolt the brake line from the strut using the 3/8” impact with the 10mm socket. Remove the Christmas tree that holds the ABS line in place. (Figure 4)
4.Using the 13 mm deep socket and 3/8” drive impact gun, remove the nuts from the four upper strut bolts (in the engine bay). (Figure 5)
5.Carefully maneuver the strut out of the wheel well so that it does not hit the brake lines.
6.Keep the strut; you will need parts of it to complete the assembly of the new front strut.
7.Repeat steps 1 – 6 to remove the front strut from the other side of the car.
Figure 4
Figure 5
9
