Turn the Temperature Control Knob to the LOCK/OFF Position. Push the one pound propane cylinder slightly into the valve while turning counterclockwise until a snug fit is obtained.
Testing for Leaks
SAFETY PRECAUTIONS:
• Test all gas connections for leaks before using your propane grill.
• Test for leaks every time you connect the gas supply.
• Do not smoke while checking for leaks.
•DANGER - Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for leaks. This will result in a fire or explosion which can cause serious bodily injury or death, and damage to property.
•Test for leaks outdoors in a well venti- lated area.
1. Mix a couple tablespoons of liquid detergent with an equal amount of water. Use mild soap and water. DO NOT USE HOUSEHOLD CLEANING AGENTS.
2.Be sure that the Temperature Control Knob is in the LOCK/OFF position.
3.Use a clean paint brush to brush soapy solution onto connection between gas cylinder and Regulator orifice, and watch for bubbles.
4.If bubbles form or if a bubble grows, there is a leak. Retighten connec- tion and repeat steps (2) and (3).
NOTE: If you cannot stop a leak, remove gas cylinder and check for damaged threads, dirt and debris at the connection and gas cylinder. Also check to see if anything is obstructing flow of gas at the connection and gas cylinder openings. Remove any obstruction that may be found and repeat leak test.
Checking the Ignitor:
•The Temperature Control Knob must be in the “LOCK/OFF” position. Press the Ignitor button rapidly. A “CLICK” should be heard and spark seen through Flame Viewing Hole.
10