Before First Use
1.Remove the grill and any packaging materials from the shipping carton.
2.Place the Storage Case/Stand on a flat, level surface.
3.Unlatch the Storage Case/Stand and raise the Storage Case/Stand cover. Remove the Base Support Ring and the grill assembly.
4.Open the Grill Cover, remove the Drip Container and swing both Side Trays out to the side to remove the Grill Plate.
5.Wipe the Storage Case/Stand, Grill Body and Side Trays with a damp cloth to remove any dust. Wash the Grill Plate and Drip Container in warm, soapy water. Rinse and dry thoroughly.
6.The Handle Assembly and
mounting hardware are pack- | Handle | |
aged separately in a plastic |
| |
bag. Remove all parts, then |
| |
properly position the Handle on | Screw/ | |
the front of the Grill Cover with | ||
Washer | ||
the screws in the Handle facing | ||
| ||
down. From the inside of the | Cover | |
Grill Cover, place one of the | ||
Screws and Washers through |
| |
the hole in one side of the Cover | Figure 1 | |
and into the Handle. Repeat with | ||
|
the other side of the Handle. Securely fasten both Screws with a Phillips head screw driver. See Figure 1.
7. See "Grill Positions" and "Assembly Instructions" on the following pages.
Grill Positions
The
Storage Position: This position makes the grill compact enough for space saving storage. The Side Trays fold inside the grill allowing the entire grill assembly to be stored neatly and securely in the Storage Case/Stand. See "Storing Your Propane Grill" on page 17.
Figure 27