CARE AND CLEANING
How to Disassemble the Juicer
IMPORTANT: Before disassembling the Juicer make sure that the Electronic Control is in the Off position, the plug has been removed from the wall outlet and the motor has stopped completely.
1.Remove the Food Pusher from the Feed Tube.
2.Remove the Pulp Container by holding onto the Feed Tube and tilting the juicer slightly to disengage the Safety Foot on the Pulp Container.
3.Remove the Juice Jug.
4.Hold the Pulp Chute/Juicer Cover and disengage the Locking Bar from the grooves on the side of the Pulp Chute/Juicer Cover. (See Ill. 1)
5.Lift and remove the Pulp Chute/Juicer Cover. (See Ill. 2)
6.Remove the Stainless Steel Juice Collector and Strainer Basket by placing one hand under the spout and the other under the black plastic edge opposite the spout and lifting upwards.
The Stainless Steel Strainer Basket can be removed from the Juice Collector by pushing it up through the hole in the bottom of the Juice Collector.
NOTE: Be careful when handling the Strainer Basket as the cutting blades are very sharp.
•
•
•
Ill.1
•
• 
•
Ill. 2
8
