Samson HX810 Connecting the HX410 and HX115 to Your Amplifier, Using the Extension Output

Connecting the HX410 and HX115

IMPORTANT: There is a minimum safe impedance so be sure to check the manu- facturer’s recommended impedance for your amplifier to avoid any damage to your amplifier or voiding your warranty.

Connecting the HX410 and HX115 to Your Amplifier

Hartke Systems

Distributed Exclusively by Samson Technologies Corp. Hicksville, New York 11802

EFFECT

ENGLISH

The HX410 and HX115 connections are made via either the 1/4” phone jacks or Speakon connectors located on the rear panel jack-plate. Be sure to make your connection with un- shielded speaker cable. Connect the Amplifier Output to the speaker Input on the HX410’s or HX115’s rear jack- plate.

	MODEL 2000
8	200 WATTS	SPEAKER OUTPUTS
	= 120 WATTS
4	= 200 WATTS

Using the EXTENSION Output

The HX410 and HX115 provides

Hartke Systems

Distributed Exclusively by Samson Technologies Corp. Hicksville, New York 11802

EFFECT

a convenient Extension Output for connecting additional speaker cabinets in parallel. Be sure to read the section above on impedance to insure a proper hook-up with your amplifier. Follow the steps below to connect two HX410 or HX115's using the Extension Output. Connect the Amplifier Output to the Input of the first HX410 or HX115. Now, connect the Extension Output to the Input of the second cabinet.

	MODEL 2000
8	200 WATTS	SPEAKER OUTPUTS
	= 120 WATTS
4	= 200 WATTS