2.Press PLAY. ED or E<<ýflashes.
3.Press –/)or +/- so E<< flashes to turn off the key tone or ED flashes to turn on the key tone.
4.Press STOP to finish the setting and exit the options mode.
5'66+0)"6*'"6+/'
1.Hold down MENU/FOLDER for more than one second while the recorder is
stopped, then repeatedly press or hold down –/)or +/- until J?C;ýflashes.
2.Press PLAY.
3.See “Setting the Clock” on Page 2 for instructions on setting the time.
75+0)"6*'"4'%14&'4"
9+6*"#"2%"
You can use the supplied RadioShack Digital Wave Player software to:
•download the files in your recorder to your computer
•store and manage voice recordings made with the recorder
•play back files
•record voice files directly on a PC using the recorder with a USB terminal connector
Before transferring recorded files or recording directly to the PC, be sure:
•the recorder is connected to the PC properly
•25 MB or more of the hard-disk space are available (to assure stable performance of the PC)
•the PC’s free memory is sufficient for recording a .wav file. This table shows the file size and transfer time of a 5- minute .wav file:
/QFG | 5K\G"QH"HKNG | 6TCPUHGT"6KOG |
| | |
HQ | About 3.2 MB | About 1 minute |
| | |
SP | About 1.6 MB | About 30 seconds |
LP | About 1.2 MB | About 15 seconds |
| | |
Notes:
•The RadioShack Digital Wave Player software is for use exclusively with the DR-86. It is not to be used with other recorders.
•You cannot send files from the PC to the recorder or overwrite files in the recorder with RadioShack Digital Wave Player.
•RadioShack Digital Wave Player does not support speech-recognition software.
•RadioShack Digital Wave Player does not support Apple Macintosh computers.
•These instructions assume users are familiar with Microsoft Windows software. For details on PC operation or your operating system, refer to the operating instructions for your PC.
•If you are installing the software on Windows 2000 or Windows XP Professional, you must log in as the administrator.
12'4#6+0)"'08+410/'06
Operating system: Microsoft Windows 98/Me/ 2000 Professional/XP.
| PC | IBM PC/AT-compatible |
| machine |
| |
| | |
| CPU | Intel Pentium 166 MHz or |
| more |
| |
| RAM | 32 MB or more |
| | |
| | 25 MB (additional space |
| Hard-Disk Space | required to store voice |
| | files) |
| | Creative Labs Sound |
| Sound Card | Blaster 16 or any 100% |
| | compatible sound card |
| | |
| Display | 800 ⋅ 600 pixels min., |
| 256 colors min. |
| |
| CD-ROM Drive | 2X or faster |
| USB port | At least one free port |
| Audio Output | Earphone (or speaker) |
| Jacks | outputs |
| | |
Note: USB support is not available if Windows 98/Me/2000/XP is upgraded from Windows 95, even if the PC is equipped with a USB port.
+056#..+0)"&+)+6#."9#8'" 2.#;'4
Notes:
•Do not connect the recorder and the PC before installing RadioShack Digital Wave Player.
•Close any open applications before you start installation of RadioShack Digital Wave Player.
1.Place the RadioShack Digital Wave Player CD-ROM in the CD-ROM drive. The installation program automatically starts. If it does not, double-click the CD- ROM icon in the Explorer window, then double-click the Setup.exe icon.
2.Install RadioShack Digital Wave Player by following the instructions that appear on the screen.
3.After completion of setup, remove the CD-ROM from the CD-ROM drive.
70+056#..+0)"&+)+6#."9#8'" 2.#;'4
1.Click Start/Programs/RadioShack Digital Wave Player/Uninstall Digital Wave Player.
2.Follow the on-screen instructions to uninstall the RadioShack Digital Wave Player.
4700+0)"&+)+6#."9#8'"2.#;'4
Note: Before making any connections, make sure that the recorder is stopped.
Connect the recorder to your PC by plugging one end of the supplied USB cable into the PC I/F port on your recorder and the other end of the cable to the back of your PC (refer to your PC’s owner’s manual for the location). The RadioShack Digital Wave Player starts, and the main window automatically appears.
To use RadioShack Digital Wave Player without connecting the recorder to the PC, or if RadioShack Digital Wave Player does not start automatically when you connect the recorder to the PC, click Start/Programs/
RadioShack Digital Wave Player/Digital Wave Player.
To exit RadioShack Digital Wave Player, click on the Exit button in the upper right corner of the window, or click
Player.
Notes:
•It may take a few minutes to start the RadioShack Digital Wave Player for the first time.
•You cannot operate the buttons and controls on the recorder, except for microphone-sensitivity switch, while the recorder is connected to the PC.
•Do not use any USB cable other than the one supplied.
•Disconnect the USB cable after file transfer or recording is completed.
64#05('44+0)"4'%14&'&"(+.'5" 61"6*'"2%
64#05('44+0)"#.."(1.&'45
Click theicon (the first icon from the left on the tool bar). All files in the recorder are transferred to the corresponding PC’s folders. For example, all files in Folder [A] on your recorder are transferred to Folder A on your PC.
64#05('44+0)"#"5'.'%6'&"(1.&'4
Click theicon, Transfer Folder B icon, or Transfer Schedule Folder icon on the tool bar. All files in the selected folder in the recorder are transferred to the corresponding PC’s folder.
