3 Alignments and Adjustments
3-1

3-1 Required Equipment

The following equipment is necessary for adjusting the monitor:
Computer with Windows 95, Windows 98, or Windows NT.
 MTI-2055 DDC MANAGER JIG

3-2 DDC EDID Data Input

1. Input DDC EDID data when replacing AD PCB.
2. Receive/Download the proper DDC file for the model from HQ quality control department.
Install the below jig (Figure 1) and enter the data.
3 Alignments and Adjustments
This section of the service manual explains how to use the RS232 JIG.
This function is needed for AD board change and program memory (IC200) change.
M
TI-2
055
DDC Mana
g
er
Parallel Connector
(25P Cable)
Connect Monitor
(Signal Cable)
Figure 1.

3-3 Hidden Key list