Samsung 320P manual Front, Click here to see an animation clip

Front

1.	MENU	6.	PIP
2.	Navigate buttons (Up-Down buttons)	7.	Power button
3.	Adjust buttons (Left-Right buttons)/	8.	Power indicator
	Volume buttons
4.	ENTER	9.	Remote Control Sensor

5.SOURCE

1.MENU

Opens the on-screen menu and exits from the menu or closes the screen adjustment menu.

2.Navigate buttons (Up-Down buttons)

Moves from one menu item to another vertically or adjusts selected menu values.

3.Adjust buttons (Left-Right buttons) / Volume buttons

Moves from one menu item to another horizontally or adjusts selected menu values. Adjusts the audio volume.

4.ENTER

Activates a highlighted menu item.

5.SOURCE

Switches from PC mode to Video mode.

Changing the source is only allowed for external devices that are connected to the monitor at the time.

To switch Screen modes:

[PC] [BNC] [DVI] [AV] [S-VIDEO] [Component] >>Click here to see an animation clip

6.PIP

Push the PIP button to turn the PIP screen On/Off.

More than one PIP cannot overlap on screen as BNC and the component use the same terminal.

>>Click here to see an animation clip

• PC / DVI

: AV / S-Video / Component Mode

• BNC

: AV / S-Video Mode

• AV / S-Video

: PC / BNC / DVI Mode

• Component

: PC / DVI Mode

7.Power button

Turns the monitor On/Off.

8.Power indicator

Shows PowerSaver mode by blinking green.

9.Remote Control Sensor

Aim the remote control towards this spot on the Monitor.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended