Samsung 320P manual Coarse / Fine 3 Position 1 Signal Balance 2 Signal Control

1) Red

2) Green

3) Blue

If you adjust picture using Color Control function, Color Tone will turn to Custom mode.

Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again.

- Available in PC/BNC Mode Only

1) Coarse

: Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.

2) Fine

: Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed).

3) Position

	: Adjusts the screen location horizontally and vertically.
Auto	The values of Fine, Coarse, Position are adjusted
Adjustment	automatically.
	By changing the resolution in the control panel, the auto
	function is performed.
	- The direct button on the remote control is 'AUTO'
	button.
	- Available in PC/BNC Mode Only
Signal	This is used to make up for the weak RGB signal transmitted
Balance	by a long signal cable.
	1)	Signal Balance
	Selects either On or Off with the signal control.
	2)	Signal Control
	Adjusts the R Phase, G Phase, B Phase, Gain and
	Sharpness manually.
Size	The Size can be switched.
	1)	16:9
	2)	4:3
PIP Picture	Adjusts the PIP Screen Settings.
	1)	Contrast

:Adjusts the Contrast of the PIP window on the screen.

2) Brightness

:Adjusts the Brightness of the PIP window on the screen.

3) Sharpness

:Adjusts the difference between the lightest and darkest areas of the PIP window.

4) Color

:Adjusts the Color of the PIP window on the screen.

5) Tint

: Adds a natural tone to the PIP window.

Available Modes : PIP

1)Coarse / Fine

3)Position

1)Signal Balance

2)Signal Control

AV / S-Video / Component Mode