Video signal. (Off/On)
More than one PIP cannot be overlapped on screen as BNC and the component use the same terminal.
1) PIP
-The direct button on the remote control is 'PIP' button.
Off
On
:Turns the PIP Screen Off/On.
2)Source
-The direct button on the remote control is the 'SOURCE' button.
PC / DVI
: AV /
BNC
: AV /
AV /
: PC / BNC / DVI Mode
Component
:PC / DVI Mode
:Selects the input source for the PIP.
3)Swap
- The direct button on the remote control is 'SWAP' button.
:Swaps the contents of the PIP and main image.
The image in the PIP window will appear on the main
screen, and the main screen image will appear in the PIP window.
4) Size
- The direct button on the remote control is 'SIZE' button.
: Changes the Size of the PIP window.
If you select , , in Size, Position and Transparency will not be activated.
5)Position
:Change the Position of the PIP window.
6)Transparency High
Medium
Low
Opaque
:Adjusts the Transparency of PIP windows.
Available Modes : PIP
Edit Name Name the input device connected to the input jacks to make your input source selection easier.
1)PC
2)BNC
3)DVI
4)AV
5)
6)Component
1) PIP
2)Source
3)Swap
4)Size
5)Position
6)Transparency
Picture
PC / BNC /DVI Mode