English - 15

CHANNEL CONTROL

ConguringtheChannelMenu

Antenna→Air/STD/HRC/IRC

Before your television can begin memorizing the available channels, you must specify the type
of signal source that is connected to the TV (i.e. an Air or a Cable system).
STD, HRC and IRC identify various types of cable TV systems. Contact your local cable
company to identify the type of cable system that exists in your particular area. At this
point, the signal source has been selected.

Auto Program

First, select the correct signal source (Air, STD, HRC, or IRC).
The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two
minutes.
Press the ENTER
E
button at any time to interrupt the memorization process and return to the Channel menu.
To stop the search before it has nished, press the ENTER
E
button with Stop selected.

Channel List

For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions.
You can select these options by simply pressing the CH LIST button on the remote control.

fine Tune

Use ne tuning to manually adjust a particular channel for optimal reception.
If you do not store the ne-tuned channel in memory, adjustments are not saved.
* will appear next to the name of ne-tuned channels.
To reset the ne tuning setting, press the ▼ button to select Reset, then press the ENTER
E
button.
ColorSystem→Auto / PAL-M / PAL-N / NTSC
Normally the TV can receive image and sound with good quality when in the mode auto. This mode detects the signal color system
automatically. In case of some signal reception with color unsatisfactory, select the Color System Mode to PAL-M, PAL-N or NTSC.
¦
❑
N
❑
N
N
N
❑
O
❑
N
N
N
❑
Picture
Sound
Channel
Setup
Input
Antenna :
Air
Auto Program
Channel List
fine Tune
Color System :
Auto
UMove EEnter RReturn
TV Channel
BN68_01975G_00L02.indb 15 2009-04-14 �� 10:08:17