Samsung 350 user manual Picture Options, Reset → OK / Cancel

Flesh Tone

You can emphasize the pink ‘flesh tone’ in the picture.

N Changing the adjustment value will refresh the adjusted screen.

Edge Enhancement → Off / On

You can emphasize object boundaries in the picture.

❑Picture Options

NIn PC mode, you can only make changes to the Color Tone and Size from among the items in Picture Options.

Color Tone → Cool / Normal / Warm1 / Warm2

NWarm1 or Warm2 is only activated when the picture mode is Movie.

NSettings can be adjusted and stored for each external device you have connected to an input of the TV.

Size

TV	Picture Options
Picture	Color Tone	: Normal	
	Size	: 16:9	
Sound	Digital NR	: Auto	
	HDMI Black Level	: Normal	
Channel	Film Mode	: Off	
Setup
Input	UMove	EEnter	RReturn

Occasionally, you may want to change the size of the image on your screen. Your TV comes with screen size options, each designed to work best with specific types of video input. Your cable box/satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.

OAlternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.

● 16:9 : Sets the picture to 16:9 wide mode.

● Wide Zoom : Magnify the size of the picture more than 4:3.

● Zoom : Magnifies the size of the picture on the screen.

● 4:3 : Sets the picture to 4:3 normal mode.

● Screen Fit : Use the function to see the full image without any cutoff when HDMI (720p/1080i) or Component (1080i) signals are input.

N Temporary image retention may occur when viewing a static image on the set for more than two hours.

N After selecting Zoom mode: Select by pressing the ◄ or ► button. Use the ▲ or ▼ button to move the picture up and down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.

N Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the by pressing the ► or ENTERE button.

N After selecting Just Scan in HDMI (1080i) or Component (1080i) mode: Select by pressing the ◄ or ► button. Use the ▲, ▼, ◄ or ► button to move the picture. Press the ENTEREbutton.

Reset : Press the ◄ or ► button to select Reset, then press the ENTEREbutton. You can initialize the setting. N HD (High Definition): 16:9 - 1080i, 720p (1280x720)

N Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Input Source	Picture Size
TV , AV, Component (480i, 480p)	16:9, Wide Zoom, Zoom, 4:3
Component (1080i), HDMI (720p, 1080i)	16:9, 4:3, Wide Zoom, Zoom, Screen Fit
PC	16:9, 4:3

Digital NR → Off / Low / Medium / High / Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

N When the signal is weak, select one of the other options until the best picture is displayed.

HDMI Black Level → Normal / Low

You can select the black level on the screen to adjust the screen depth.

N This function is active only when an external device is connected to the TV via HDMI. The HDMI Black Level function may not be compatible with all external devices.

Film Mode → Off / Auto

The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

N Film Mode is supported in TV, Video, Component (480i / 1080i) and HDMI (480i / 1080i).

❑Reset → OK / Cancel

Resets all picture settings to the default values.

English - 18