Samsung 451 user manual Operation Turning the TV On and Off, Plug & Play Feature, Enter

Operation

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

The Screen Saver is activated if there is no remote control key input for longer than 1 minute while “Plug & Play” is running.

The Screen Saver is activated if there is no operating signal for longer than 15 minutes.

1.Press the POWER button on the remote control.

The message “Menu Language, Store Demo, Channels and Time will be set.” is displayed.

Press the ENTER button, then “Select the language of the OSD” menu is automatically displayed.

2.	Press the	ENTER	button.
	The message “Select ‘Home Use’ when installing this TV in your home.” is
	displayed.
3.	Press the	Store Demo” or “Home Use”, then
	press the ENTER	button.

The message “Select the antennas to memorize.” is displayed.

We recommend setting the TV to “Home Use” mode for the best picture in your home environment.

“Store Demo” mode is only intended for use in retail environments.

If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

4.Press the

Press the ENTER button to select “Start”.

Air: “Air” antenna signal. Cable: “Cable” antenna signal.

Auto: “Air” and “Cable” antenna signals.

In Cable mode, you can select the correct signal source among STD, HRC, and

IRC by pressing theENTER button. If you have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.

5.The TV will begin memorizing all of the available channels.

To stop the search before it has finished, press the ENTER button with “Stop” selected.

After all the available channels are stored, it starts to remove scrambled channels (see page 28). The Auto program menu then reappears.

Press the ENTER button when channel memorization is complete. The message “Set the Clock Mode.” is displayed.

Plug & Play

Menu Language, Store Demo,

Channels and Time will be set.

Start

Enter

Plug & Play

Select the language of the OSD.

Language	: English
	Español
	Français
	Move	Enter

Plug & Play

Select ‘Home Use’ when installing this TV in your home.

	Store Demo				Home Use
Move				Enter
		Plug & Play
Select the antennas to memorize.
Air				Start
Cable				Start
Auto				Start
	Move			Enter				Skip
		Plug & Play
Selects a cable signal type for your location.
	Analog
	STD			Start
	HRC
	IRC
	Digital
	STD
	HRC
	IRC
Move				Enter			Skip
	AutoPlugProgram& Play
Auto Program in Progress.
DTV Air : 02		Air : 11
DTV Cable : 23		Cable : 21				Cable		50
						50		%
			Stop
				Enter				Skip
	AutoPlugProgram& Play
Removing scrambled channel.
						DTV Cable		41
						77		%
			Stop
				Enter				Skip

English - 13