Reset all the settings for the display.

Multi Control

Available Modes
• PC / DVI / DisplayPort
• AV
• Component
• HDMI
• MagicInfo
• TV
Note
• A TV tuner box (sold separately) must be connected to use the TV. (US Only)
•MagicInfo can only be enabled when a network box is connected.

Multi Control

Assigns an individual ID to the SET.
•ID Setup
Assigns distinctive IDs to the SET.
•ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
•MDC Connection
Selects a port to receive the MDC inputs from.
• Communicates with the MDC via a RS232C MDC cable.
• Communicates with the MDC via an RJ45 MDC cable.
•Network Setting
•IP Setting : Manual, Auto
•IP Address : Manually enter the IP Address if IP Setting is set to Manual.
Adjusting the LCD Display