Installation

Connecting to a Monitor

Please connect the video output terminal located on the back of the camera to the monitor.

•The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument.

•Please turn off the power when connecting.

•Please select Hi-Z on the 75/Hi-Z switch for the intermediate video TV set and select 75for the Intermediate device as shown in the picture below.

Intermediate Monitor

DOME Camera

BNC

COLOR DOME CAMERA 14 User’s Manual

Connecting to Power

Connect the adaptor to the power input connector as shown in the figure below. The recommended adaptor specification for SID-45CN/CP, SID-46CN/CP is DC 12V, 500mA .

DC Power Type (DC 12V, 500mA)

Adaptor

DOME CameraPower Input Connector

When the resistance value of copper wire is at [20°C(68°F)]

Copper wire size (AWG)

#24(0.22mm2)

#22(0.33mm2)

#20(0.52mm2)

#18(0.83mm2)

Resistance (/ m)

0.078

0.050

0.030

0.018

Voltage Drop (V/m)

0.028

0.018

0.011

0.006

 

 

 

 

 

•As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.

*Standard voltage for camera operation : DC 12V±10%

*There may be some deviation in voltage drop depending on the type of wire and the manufacturer.

Notes

Adaptor isn’t offer to accessory.

Please check the polarity of the DC power source before connecting to power.

COLOR DOME CAMERA 15 User’s Manual

Page 8
Image 8
Samsung 46C user manual Connecting to a Monitor, Connecting to Power