COLOR DOME CAMERA User’s Manual
29
COLOR DOME CAMERA User’s Manual
28
SYNC : In LINE-LOCK mode, it synchronizes the video signal between cameras
without a synchronous generator.
- INT : Internal synchronization - LL : External line-lock synchronization
•If you choose ‘LL’, you can adjust the desired phase.
Press the SET button.
•You can adjust the desired phase from 0 to 359.
MOTION DETECTION:
This product has a feature that allows you to observe movements of objects in 4
different areas on the screen, and the words 'MOTION DETECTED' appear on the
screen when movement is detected; hence a single individual can conduct
supervision efficiently. The camera detects an object's movement by sensing disparity
of outline, and level of brightness and color.
•Please press the SETUP button.
- OFF : MOTION DETECTION mode is cancelled.
- ON : Any motion in the selected areas is observed.
•Please select the area you wish to observe from the 4 areas in AREA SEL mode.
•Please select ON mode for the chosen area.
5) When a name has been chosen, please select a position for the name display.
Please move the cursor onto 'POS' and then press the SETUP button.
The name will appear at the top left hand
corner.
Please find the position you wish to display
the name by using the 4 directional buttons,
and then press the SETUP button.
6) Please select 'END' and then press the SETUP button to complete ID input.
to Locate, then SETto Locate, then SETto Locate, then SET
FRONT DOOR
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-. 123456789
CLR POS END
to Locate, then SET
FRONT DOOR
COLOR (Electronic DAY & NIGHT)
- AUTO: This camera has a function which electronically changes to the appropriate
mode for daytime or night-time. The COLOR mode is operated for daytime,
and it converts to BW mode for night-time.
- ON: The color mode is selected electronically.
•If AGC is OFF, you can’t select AUTO mode.
•When an infrared light is used, there may be a problem with focusing and COLOR
(DAY & NIGHT).
Notes
Camera Operation
•'Sync' mode is fixed ‘INT’ in DC 12V input power.
Notes