EMC and Safety standards Applied
Product Name : SRP-500
The following standards are applied only to the printers that are so labeled.
Europe : CE marking, TUV/GS : EN60950 ; 1999
North America : EMI : FCC Class A
Safety standards : UL / C-UL : UL60950-3rd.
National : CB-scheme : IEC 60950 ; 1999
WARNING
The connection of a non-shielded printer interface cable to this printer
will invalidate the EMC standards of this device.
You are cautioned that changes or modifications not expressly approved
by the party responsible for compliance could void your authority to operate the
equipment.
CE Marking
The printer conforms to the following Directive and Norms
Directive 89/336/EEC EN 55022 Class A :1998
EN 55024 : 1998
(EN 61000-4-2 : 1995+A1 : 1998)
(EN 61000-4-3 : 1996)
(EN 61000-4-4 : 1995)
(EN 61000-4-5 : 1995)
(EN 61000-4-6 : 1996)
(EN 61000-4-11 : 1994)
EN 61000-3-2 : 1995+A1 : 1998+A2 : 1998)
EN 61000-3-3 : 1995
Directive 73/23/EEC Safety : EN 60950 ; 1999
All rights reserved. No part of this publication may reproduced,
stored in a retrieval, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise, without
the prior written permission of SAMSUNG ELECTRO-MECHANICS.
No patent liability is assumed with respect to the use of the
information contained herein. While every precaution has been taken
in the preparation of this book, SAMSUNG ELECTRO-MECHANICS
assumed no responsibility for errors or omissions. Neither is any
liability assumed for damages resulting from the use of the
information contained herein.
Neither SAMSUNG ELECTRO-MECHANICS nor its affiliates shall be liable
to the purchaser of this product or third parties for damages, losses, costs,
or expenses incurred by purchaser or third parties as a result of : accident,
misuse, or abuse of this product or unauthorized modifications, repairs,
or alterations to this product, or(excluding the U.S) failure to strictly comply
with SAMSUNG ELECTRO-MECHANICS’ s operating and maintenance
instructions.
SAMSUNG ELECTRO-MECHANICS shall not be liable against any damages
or problems arising from the use of any options or ant consumable products
other than those designated as Original Samsung products or Samsung
Approved products by SAMSUNG ELECTRO-MECHANICS.
Notice
The contents of this manual are subject to change without notice.
Copyright © 2002 SAMSUNG ELECTRO-MECHANICS. CO., LTD