20
DIP switch settings
Chapter 3
19

3-2. Changing the DIP switch setting

The following page show the character code tables.
To fine the character corresponding to a hexadecimal number, count
across the top of the table for the left digit and count down the left
column of the table right digit. For example, 4A=J
Page 0 (PC437 : USA, Standard Europe)
(International Character Set : USA)
Turn off the printer before removing the DIP switch cover to prevent an electric short,
which can damage the printer.
CAUTION
1)Make sure the printer is turned off.
2)Remove the screw from the DIP switch cover.
Then take off the DIP switch cover, which is shown in the illustration below.
3)Set the switches using a pointed tool, such as tweezers or a small
screwdriver.
4)Replace the DIP switch cover. Then secure it with the screw.
* The new settings take effect when you turn on the printer.
If you need to change settings, follow the steps below to make your changes.
DIP switch cover
Code table
Chapter 4