87
Setting up the printer
Chapter 1
1-4. Installing or replacing paper roll
Notice the caution label and do not touch the auto cutter blade
when you open rear cover.
CAUTION
1)To prevent data loss, make sure that the printer is not receiving data.
2)Open the rear cover by pressing the open button and push the arrow
mark back.
3)Remove the used
paper roll core if
there is one.
4)Insert the paper
roll as shown.
5)Be sure note the
correct direction
that the paper should
come off the roll.
6)Pull out small amount
of paper as shown.
Then close the cover
and tear off the extra
paper by pulling it
toward the front of the
printer.
Rear cover
Front cover Open button