Samsung LNA50PD, LN32A540, LN2A540P2D Operation Turning the TV On and Off, Plug & Play Feature

Operation

Turning the TV On and Off

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1.Press the POWER button on the remote control.

The message “Menu Language, Store Demo, Channels and Time will be set.” is displayed.

Press the ENTER button, then “Select the language of the OSD” menu is automatically displayed.

2.Press the ▲ or ▼ button to select language, then press the ENTER button. The message “Select ‘Home Use’ when installing this TV in your home.” is displayed.

3.Press the ◄ or ► button to select “Store Demo” or “Home Use”, then press the ENTER button.

The message “Select the antennas to memorize.” is displayed.

We recommend setting the TV to “Home Use” mode for the best picture in your home environment.

“Store Demo” mode is only intended for use in retail environments.

If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

4.Press the ▲ or ▼ button to memorize the channels of the selected connection.

Press the ENTER button to select “Start”.

Air: “Air” antenna signal. Cable: “Cable” antenna signal.

Auto: “Air” and “Cable” antenna signals.

In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTER button. If you have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.

5.The TV will begin memorizing all of the available channels.

To stop the search before it has finished, press the ENTER button with “Stop” selected.

After all the available channels are stored, it starts to remove scrambled channels (see page 31). The Auto program menu then reappears.

Press the ENTER button when channel memorization is complete. The message “Set the Clock Mode.” is displayed.

Plug & Play

Menu Language, Store Demo,

Channels and Time will be set.

		Start
							Enter
	Plug & Play
Select the language of the OSD.
Language	:	English
		Español
		Français
			Move				Enter
	Plug & Play
Select ‘Home Use’ when installing
this TV in your home.
Store Demo
				Home Use
Move			Enter
	Plug & Play
Select the antennas to memorize.
Air			Start
Cable			Start
Auto			Start
Move			Enter				Skip
	Plug & Play
Selects a cable signal type for your location.
Analog
STD			Start
HRC
IRC
Digital
STD
HRC
IRC
Move			Enter			Skip
	AutoPlugProgram& Play
Auto Program in Progress.
DTV Air : 02		Air : 11
DTV Cable : 23		Cable : 21			Cable			50
					50			%
		Stop
			Enter				Skip
	AutoPlugProgram& Play
Removing scrambled channel.
					DTV Cable			41
					77			%
		Stop
			Enter				Skip

English - 13