Samsung PN58B50T5F, 550, BN68-01917B-00, PN50B50T5F Installing Batteries in the Remote Control

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

NThe product color and shape may vary depending on the model.

NThe performance of the remote control may be affected by bright light.

1POWER

Turns the TV on and off.

2 TV

Selects the TV mode directly.

3NUMERIC BUTTONS

Press to change the channel.

4

Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “” and “3”.

5MMUTE

Press to temporarily cut off the sound.

6 VOL

Press to increase or decrease the volume.

7 SOURCE

Press to display and select the available video sources.

8 CH LIST

Used to display Channel Lists on the screen.

9 TOOLS

Use to quickly select frequently used functions.

0UP▲ / DOWN▼ / LEFT◄ /

RIGHT► / ENTER

Use to select on-screen menu items and change menu values.

! INFO

Press to display information on the TV screen.

@COLOR BUTTONS

Use these buttons in the Channel list and

Media Play function.

#MEDIA.P (Media play)

This function enables you to view and play photo and music files from an external device. (Refer to pages 38 (Photo) and 41 (Music))

$ P.MODE

Press to select the picture mode.

%Use these buttons in the DMA, Media Play and Anynet+ modes.

(: This remote can be used to control recording on Samsung recorders with the Anynet+ feature)

^ ON/OFF

Press to backlight the buttons on the remote. This function is convenient for using at night or when the room is dark. (Using the remote control with the light button set to On will reduce the battery usage time.)

&PRE-CH

Tunes to the previous channel.

* CH

Press to change channels.

( MENU

Displays the on-screen menu.

) FAV.CH

Press to switch to your favorite channels.

aRETURN

Returns to the previous menu.

bEXIT

Press to exit the menu.

cP.SIZE

Picture size selection.

dSRS

Selects SRS TruSurround HD mode.

eCC

Controls the caption decoder.

fMTS

Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

❑Installing Batteries in the Remote Control

1.Lift the cover at the back of the remote control upward as shown in the figure.

2.Install two AAA size batteries.

N Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3.Close the cover as shown in the figure.

N Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.)

N Using the remote control with the ON/OFF() light button set to On will reduce the battery usage time.

N If the remote control doesn’t work, check the following

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3.Are the batteries drained?

4.Is there a power outage or is the power cord unplugged?

5.Is there a special fluorescent light or neon sign nearby?

English -