2-8 Setting Up Your Printer
Installing Printer Driver

Overview

Included with your printer is a CD-ROM containing printer drivers
for some of the most popular Windows software applications. You
must install a printer driver, which translates data from your
application into data the printer understands.
The CD-ROM shipped with your printer contains the following
printer drivers and utilities. PCL6 is the combination of PCL5e and
the new PCLXLprinter language.
• PCL5e: Printer driver for Windows 95/98, Windows 3.1x, and
Windows NT 4.0
• PCLXL: Printer driver for Windows 95/98, and Windows 3.1x.
Note: You cannot use the PCLXLdriver in Windows NT 4.0.
• Smart Monitor: The Smart Monitor is installed automatically with
the printer driver. If you click on the “Smart
Monitor” in Samsung ML&QwikLaser 6050 folder,
you can monitor the printer’s status via the Smart
Monitor. You cannot monitor the status of the
printer which is connected to a network.
• Font Navigator: It’s a font manager. It gives a quick and easy way
to find fonts, install the fonts, and print the font
samples. The Font Navigator is installed
automatically with the printer driver.

System Requirement

Before you start, make sure that you have the following computer
setup. (These are the minimum requirements.)
• IBM or compatible with a 486 or higher processor
• Microsoft Windows 95/98, Windows 3.1x, or Windows NT 4.0
• 7 MB of available hard disk space
• 8 MB of RAM for Windows 3.1x
16 MB of RAM for Windows 95/98, Windows NT 4.0
• CD-ROM drive
• Centronics-compatible parallel cable (IEEE 1284-compliant)
Note: If you do not have access to a CD-ROM drive, contact your local
dealer.