4-10 Operating Your Printer
Remote Control Panel for Windows/Dos
The Remote Control Panel dialog box includes six tabs.

PRINTER

Power Save
Determines the length of time the printer waits after a job is printed
before it goes to a reduced power state. If the printer is used
constantly, select OFFwhich keeps the printer ready to print with
the minimum warm-up time. This uses more energy to keep the
printer warm and ready to print.
Timeout
Determines the amount of time in seconds the printer waits before
printing the last page of a print job that does not end with a
command to print the page.
Econo Mode
To get the most from your toner supply, set Econo Modeto ON. If
you set Econo Mode to ON, print quality may be reduced.
Note: Econo Mode item is available in PCL5e driver only.
Jam Recovery
If paper jams as it exits to the output bin, the data on the jammed
page will be lost. If you set Jam Recovery feature to ON, the printer
keeps the image for a printed page until the printer signals that the
page has successfully exited the printer. The printer reprints all
jammed pages.
With the feature set to OFF, the printer does not reprint a page that
has jammed.

PAGE SETUP

Paper Size
Sets the paper size.
Paper Source
Sets the default paper source.
Lines Per Page
Use this menu item to change the number of lines that print on each
page. The setting can range from 5 to 128 lines per page.
Copies
Sets the number of copies printed for each page.