Samsung 795DF, 793S, 797DF, 793V, 795MB, 783DF, 591v, 793DF manual Setup-For Multimedia model

SyncMaster 997DF

1.Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2-1.Connecting to a computer

Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

2-2.Connecting to a new Macintosh

Connect the monitor to the Macintosh computer using the D-SUB connection cable.

2-3.Connecting to an old Macintosh

Connect your monitor to the Macintosh using the adapter for Macintosh (sold separately).

3.When you use a BNC connector.

Connect the signal cable to the BNC signal port on the back of your monitor/computer.

4.Turn on your computer and monitor. If your monitor displays an image, installation is complete.

Setup-For Multimedia model