Manual tuning - FM

1. Fully extend the telescopic aerial.

2. Press the On / Standby button to switch on your sound system.

3.Press the DAB/FM button to select the FM band.

4.Rotate the Tuning control to tune to a station. The frequency will change in steps of 50kHz.

If the radio is tuned to a station of suffi cient signal strength with RDS information present, then the display may change to show the station name. After ten seconds the display will revert to showing the time and day.

5.When the waveband end is reached the radio will recommence tuning from the opposite waveband end.

6.Set the Volume to the desired setting.

7. To switch off your sound system press the On / Standby button.

If you fi nd that an FM broadcast has a lot of background hiss, this may often be reduced by setting the radio into Mono reception mode for the current FM station. Please refer to the section "Stereo / Mono setting - FM" on page 27 for further details.

2,7

3

4

6

13